Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ doromatic parts manual? ”

Resolution: To determine the SC series, measure center to center on the closer body bolt hole mounting pattern and an overall description of the closer and arm. SC91 -- 6-3/8" x 3/4" -- unique arm SC93 -- 9-1...:

How is HB achieved on the 1690 device?

Resolution: Install the pinion cam at the top of the retractor per Figure 7-3 in Step 7 of 1690 Instructions.:

How do you adjust a door closer?

Resolution: How to: What are the steps to adjust a door closer? Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All closers with a "Del...:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

How do I get service on my Astro Swing operator that isn't working properly?

Resolution: LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...:

Are there any parts available for the old Dor-O-Matic 1200 overhead concealed series closers?

Resolution: The Dor-O-Matic overhead concealed manual door closers have been obsolete since 1999, and there are no parts available for them.:

Where are the part manuals for Falcon exits?

Resolution: Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the :

What power supply is need for Falcon EL devices?

Resolution: The Von Duprin PS914 power supply with either the 900-2RS or the 900-4RL option board is required.:

How far can the 1690 series Doromatic be cut down?

Resolution: A standard 1690 device can be shortened by 6" per page 12 of the 1690 instructions:

What strike is used for a pair of doors with a Dor O Matic Rim device x Flushbolts on inactive door?

Resolution: The STK45 strike is used on the inactive door leaf.:

What is the part # for Doromatic pinion cam?

Resolution: Part numbers are: 4270903177 for 1 each CAM.102 for a package of 10:

Is the old Doromatic 1090 the same as a 2090?

Resolution: Yes, with the exceptions that the 2090 base material is aluminum whereas the 1090 was either brass or bronze base material depending on the finish.:

When did Doromatic change the 1690 dogging assembly?

Resolution: The old style dogging design was only supplied for the first year and only through Kawneer. This change occurred in 1991.:

Can you operate a Doromatic EL 1490 with an LCN power supply?

Resolution: This is not possible. Due to the device's 16 Amp in-rush it would require it's own PS914-2RS which will power 1 or 2 devices.:

What is the difference between ED and EL for Doromatic devices?

Resolution: EL only retracts the latchbolt or vertical rods/latches. Pulling on or tampering with the push bar has no effect on the solenoid plunger remaining seated in the solenoid. ED retract...:

Are any of the DOM exit devices rated?

Resolution: Fire rated devices are not an option.:

Can the Von Duprin RX Switch be installed on an existing Falcon Monarch 19?

Resolution: The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.:

Is the 1990 a direct replacement for the 990 Exit device?

Resolution: Yes, the 1990 is the direct replacement for the 990 devices.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ doromatic parts manual? ”

RELATED FAQS