Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ door weight closer ”

Resolution: The maximum recommended door weight for LCN manual closers is 225 lbs.:

What are the dimensions of the SC70 footprint

Resolution: The measurements from center line to centerline of the mounting holes are 2-3/8" x 6-3/4".:

Resolution: The "320G" is the # on a UL sticker attached to the arm of most LCN door closers, and is not a door closer model number. The "320G" means that the arm is not a mechanical hold open device and OK t...:

Can a Cam Lift hinge be used with LCN closers?

Resolution: Cam Lift hinges can only be used with LCN door closers that have a "Regular" or "Reg hold Open" style arm. Manual Closers:Maximum lift dimension is 3/4".Can not be use (H)EDA, CUSH, or T...:

What is maximum width, height and weight for IVES butt hinges?

Resolution: Butt hinges can be used on doors up to 4' wide and 200 pounds. There is no maximum door height. However, an additional hinge must be installed every 30" when exceeding a 7' d...:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

What is a 62A shoe used for?

Resolution: The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.:

Can you order a 1461 cylinder only?

Resolution: The part number is: 1461-3071 for the door closer cylinder body.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ door weight closer ”

RELATED FAQS