Door installation instrucrions


It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documents. SDI (Steel Door Institute) installation manual can be found...
To remove the Schlage L Series from a door reference the appropriate installation instructions found here at
This information can be found at the following URL's: AD200/AD250/AD300/AD400 Cylindrical P516-092.pdf
AD200/AD250/AD300/AD400 Mortise P516-093.pdf
AD200/AD250/AD300/AD400 Cylindrical Exit P516-094.pdf
AD200/AD250/AD300/AD400 Mortise Exit P516-095.pdf
CO100/CO200/CO250 Cylindrical P516-266.pdf
CO100/CO200/CO250 Mortise P516-267.pdf
CO-Series Cylindrical Exit P516-268.pdf
CO-Series Mortise Exit P516-269.pdf
We have several blank trims listed in the price book to cover existing trim prep in door.  DEVICE EO TRIM   22  230EO  88  880EO   98/99  990EO or 996EO*  33A/35A Rim, 33/3...
  For Product Shipped Prior to August 2012 using the old (black) potted module: a.       0-100 ft 14 gauge wire b.      0-200 ft 12...
Make sure that the hold open nut is not on upside down.  The orientation of the hold open nut depends on the mounting. On a Top Jamb "Push Side" mount, the hold open nut would poi...
The Falcon W12 single dummy lock cannot be mounted back-to-back to create a double dummy.  There is no access to surface mount the screws and the lever is held in place by a roll pin wh...