Does Falcon make there own restricted keyway


A PO from a distributor with a letter of authorization from the end user.
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder.  The kit includes the following: (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 (...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus. 
Schlage Everest B keyways are restricted SFIC keyways.
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system