Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ do falcon closers come with thru bolts ”

RELATED FAQS

Resolution: The standard screw pack for an LCN closer is the SRT (Self Reaming and Tapping) screw. Thru bolts are an option, but must be specified on the order. There is no charge for them, but they do need to...:

What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?

Resolution: A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.:

What is the standard arm for the 4110 series?

Resolution: The EDA (Extra Duty Arm) is the standard arm for the 4110.:

Can a 4040 regular mount installed on the pull side and a Glynn Johnson 90 be mounted together?

Resolution: The LCN 4041/4040XP and the Glynn Johnson 90 series can be mounted in conjunction with each other without a special template. The 4040 door closer is on the pull side of the door and the GJ 90 is ...:

Does Falcon provide an On/Off switch for the 8200 series operator?

Resolution: The Falcon 8200 operator is not available with a factory supplied on/off switch. If required, it must be supplied by others.:

What keyway comes with the Falcon 19-KIL?

Resolution: The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.:

What is the thread size on LCN thru bolts?

Resolution: The LCN Thru bolts accept 1/4-20 thread. LCN thru bolts are made of steel with zinc plating.: