Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Disassemble mortise lock & deadbolt ”

RELATED FAQS

Resolution: Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI...:

What is a Grade 1 Lock?

Resolution: Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 8...:

Does Schlage make a mortise lock that the lever on either side retracts the latch and a key on either side retracts the deadbolt?

Resolution: The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt ...:

Do we have an electric strike for use w/ a mortise lock w/ deadbolt for wood frame?

Resolution: The 6216 electric strike was designed only for use with only the Folger Adams 310-3-1 mortise lock with deadbolt. The dead bolt must be retracted manually for the the strike to operate.:

Does Schlage offer a cam that will work with a Yale mortise lock?

Resolution: Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam. Schlage Cams for Yale 2160 Part Number Description B520-7...:

How do I remove an X lock from the door?

Resolution: To disassemble an X lock, remove the inside knob and unscrew the inside collar and rose. The X lock spanner wrench (012172-000-30) can be used to depress the knob catch as well as tighten/loo...: