Maximum Dutch Door sizes are:
Non Labeled = 4'0" wide X 8'0" High
Labeled = 4'0" wide X 7'2" High
Special sized Dutch Doors are available:
Special size top and/or bottom leaves are availabl...
Standard Doors: standard inverted bottom channels will accept the following manufactures automatic door bottoms:
National Guard (320)
Pemko (420)
Zero International (355/354)
Special (custom) option: a special/optional end channel that will support the following manufactures:
National Guard (422/423/522)
Pemko (443)
Zero International (360/364).
Yes, glass light can be used or prepped in conjunction with the Von Duprin 94/95 Series INPACT device however there are dimensional limitations between the glass light and the InPact door preparati...
Glass lights available:
Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification.
Glass Light Options - Other glass lights are available but ...
The minimum rose that can be used on the 61L (ANSI/BHMA A156.115.18) preparation is 3 7/16".
Steelcraft's 61L lock prep (often referred to as the "Squashed Turtle lock prep") is designed for Bored...
For both DW and K-Series Drywall Slip-on frames, Steelcraft locates the compression anchor in the jamb soffits approximately 4" down from the head on each jamb. Regardless of door opening height:
...
See below for commonly requested dimensions on the MA lock. Dimensions not found in other literature have a square around them.
CL refers to "Centerline".