Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
DIFFERENCE FROM SMALL FORMAT INTERCHANABLE CORE AND FULL SIZE
”
RELATED FAQS
Question
Answer
How to order a T series lock with a Corbin Russwin full size interchangeable prep.
Resolution:
Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6 This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.:
Does Schlage offer a 7 pin FSIC?
Resolution:
The Schlage Full Size IC core is 6 pin only. :
What is the part number for T lock tailpiece used with a conventional cylinder?
Resolution:
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:
Is the C987 a small format or full size core?
Resolution:
The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...:
Is the 23-030 a small format or full size core?
Resolution:
The 23-030 is a Schlage Full size interchangeable core. :
Can the AL locks be ordered to accept Corbin Russwin core?
Resolution:
The AL lock can not be ordered to accept any competitor full size core. The ND lock should be used in these applications.: