Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ difference cylinder for exit devices vs cylinder for L series ? ”

RELATED FAQS

Question
Answer
What is the difference between the L-Series and H-Series doors?
The L-Series doors are designed for virtually all construction requirements in commercial building applications. They have also been tested and approved for uniform wind load per ASTM E330. ...
What is the difference between the 376T and the 360T trim when it is used with Von Duprin 33/3547A exit device?
The 376T trim activates and connects to the 33/3547A top rod. The 360T activate and mounts to the 33/3547A center case.
What is the difference between LR and PL latches on Von Duprin 8827 exit devices?
LR is the regular/ standard latch and PL is Pullman/ES (Electric Strike) latch for the Von Duprin 8827 exit device.
 ES (electric strike) latch is only used with the 8827 less bottom rod on a non fire rated exit device with a 6111 electric strike.
What parts of the device and trim for the 98/99 are 643E finish?
Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison
What is the difference between Panic Hardware and Fire Exit Hardware?
Panic Hardware and Fire Exit Hardware are two different types of exit devices, and the proper selection is determined by code requirements. Panic Hardware is an exit device which is tested for u...
The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device.  There are some internal parts that may be different and the method it is secured to the d...
Available kits to convert classroom mortise locks to classroom security locks.
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077.  The...
What type of cylinder does theVon Duprin 373L trim take?
All Von Duprin 370 Series trims require a 1 1/4" mortise cylinder with a straight cam.