Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
difference between EPT
”
RELATED FAQS
Question
Answer
What is the difference between the EPT 2 and the EPT 10?:
Resolution:
The EPT2 has (2) 18 gauge wires and the EPT10 has (10) 24 gauge wires. Even though they are 18 gauge or 24 gauge wires they are special high stress, high flex, & high current wires specifically u...:
What is the difference between 4600 and Senior Swings from an application purpose?
Resolution:
The 4600 is designed for an opening with (MOSTLY) manual traffic, and the (OCCASIONAL) automatic activation. The Senior Swing is designed for an opening with (MOSTLY) automatic activation, and (OC...:
What is the difference between a warm boot and a cold boot on a biometric handreader?
Resolution:
A warm boot on a biometric handreader resets the handreader to factory default settings but does not erase the user database. A cold boot on a biometric handreader resets the handreader to factory...:
What is the difference between the E option and the E996 option for 98/99 series rim devices?
Resolution:
We used to offer a E99 rim device where there was a solenoid to lock or unlock the lever or thumbpiece trim on the back side of the center case of the 98/99 device. When we created the E996L trim ...:
What is the difference between LR and PL latches on Von Duprin 8827 exit devices?
Resolution:
ES (electric strike) latch is only used with the 8827 less bottom rod on a non fire rated exit device with a 6111 electric strike.:
What is the difference between the standard lever inserts for the pre-2002 AL and the old D Lever?
Resolution:
The old D-Series Lever used a standard lever insert similar to the pre-2002 AL-Series standard lever insert. The old D Lever insert was smaller than the AL and the two were not comp...: