difference between entry and office lock ?

RELATED FAQS

Question
Answer
CLASSROOM LOCK: A lock that locks and unlocks the outside lever with a key.  Inside is always free egress. ENTRY LOCK:  A lock that locks and unlocks the outside lever with button/turn on the insi...
Entry/office lock - Latch bolt operated by knob/lever from either side except when outside knob/lever is made inoperative by buttons in face. When outside knob/lever is locked, latch bolt is retrac...
Office and inner entry lock with three-point latch - Latchbolt is retracted by knob/lever from either side unless outside is made inoperative by key outside or inside thumbturn. When outside is loc...
B511 (ANSI F109) Entry/Office Lock  Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked.  Push button locki...
Entry/office lock—Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside ...
Office, entry lock two-point latch - Latchbolt(s) retracted by lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latch...
Entrance/office and inner entry lock - Latchbolt is retracted by knob/lever from either side unless outside is made inoperative by key outside or inside thumbturn. When outside is locked, latchbolt...
Entry/office lock—Turn/push button locking. Pushing and turning button locks outside knob requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside k...
Entry/Office Lock - Outside Key retracts latch when button pushed and turned. Lever is unlocked with key when push-button is pushed. Inside Turn/push-button: pushing and turning button locks outsid...
Entry/Office lock - Deadlocking latch bolt by levers. Turn/push button locking. Pushing and turning button locks outside lever, requiring use of a key for unlocking the door until button is manuall...