Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Dezigner Trim install ”

RELATED FAQS

Resolution: Basic glass trim details: :

Does Steelcraft have frame installation instructions?

Resolution: It is always recommended to point installers to the industry installation manuals which are very comprehensive and are ANSI documentsClick here to get the updated link to the Steelcraft Shop M...:

Can a door have an INPACT device and glass lights?

Resolution: Glass lights available:Standard Glass Lights - The N4, N5 & V lite can be used at standard locations without any modification.Glass Light Options - Other glass lights are available but have lim...:

Are window kits available for Steelcraft doors?

Resolution: Window kits are available for Steelcraft doors as either factory installed or prepared and installed by a distributor. Factory prepared light cutouts are supplied with Dezigner trim as ...:

What is exposed glass size?

Resolution: When dealing with glass lights in doors, there are three (3) critical dimensions which must be coordinated: Exposed Glass Size (EGS) - the horizontal and/or vertical dimensional size of the vision...:

Are doors available for use with non Steelcraft window kits?

Resolution: Doors are available with cutouts only. This practice is used for field installation of aftermarket (non-Steelcraft) glass trim by either the distributor or end user. The following information must ...:

Why would the 996L trim not lock or unlock when installed with 98 or 99EO?

Resolution: The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch. To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...:

Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?

Resolution: Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...: