Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
D lock door thickness
”
RELATED FAQS
Question
Answer
What is the minimum and maximum door thickness for the AD and CO series locks?
Resolution:
The minimum door thickness that the AD or CO series lock will mount on is 1 3/8". Be advised that this will require additional spacers to be ordered separately to allow the lock to mount...:
How do I order a lock for a non-standard or thick door?
Resolution:
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors. In order to do so, the extended door thick...:
How do you adjust for door thickness on an AL lock?
Resolution:
The standard door range for an AL lock is 1 3/8" to 1 7/8". Using the supplied instruction sheet, align the springcage post to desired door thickness by adjusting the outside castle nut. See inst...:
Will the AL lock fit a 2" thick door standard?
Resolution:
The AL series lock fits up to 1 7/8” door thickness out of box.:
Is there a thick door kit for the B500 deadbolt?
Resolution:
B500 with standard cylinders How to order with the deadbolt:Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is orderedDoor thickness greater than 2 1/4" will require...:
What parts are needed to install an L lock on an 1 3/8" door?
Resolution:
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...:
How to order an extended D knob series lock?
Resolution:
Specify how the door is extended and the door thickness. Example 3" EE Pricebook availability: Extended Equally (EE)- Over 2"- 6" Extended Insid...:
What is the minimum stile for Schlage locks?
Resolution:
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width. See the Schlage Minimum Stile Requirements for the minimum stile for eac...:
What parts are needed to install a T lock on a 1 3/8" door?
Resolution:
If the lock has not been ordered then specify a door thickness of 1 3/8" and a shim kit will be provided to allow installation on a thin door. If the lock has already been ordered then order ...: