Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
cylinder finish option
”
RELATED FAQS
Question
Answer
Are ND locks available in 629 or 630 finishes?
Resolution:
The AL and ND locks are not available in any stainless steel finishes. The only option is either the 626 satin chrome or 625 bright chrome.:
Are Graintech doors available with GrainTech on one face and standard panels on the others face?
Resolution:
GrainTech® doors are not available with different finishes on the inside and/or the outside door panels. Both panels must match.Standard GrainTech® finishes include:BirchAshOakMapleM...:
What is the part number for the blocking ring for use without compression ring?
Resolution:
The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).:
Can you replace just the solenoid in the 4040SE, 4040SEH, 3130SE, 2310ME, 4310ME?
Resolution:
The solenoids are not replaceable by themselves but can be ordered with a subassembly. On the SE products the track must be replaced, specify finish and voltage On the ME products the cylinder mus...:
What is the part number for the plate and the 2030 cylinder?
Resolution:
Part numbers listed below: 2030-3071 cylinder assembly includes the closer cylinder and finish plate. 2030-3971 is the cylinder only. 2030-3002 is the finish plate. 2030-3077T is ...: