CTE reader solid red

RELATED FAQS

Question
Answer
Inadequate power or wrong gauge wire is used.  The inrush current demand by CX will overload and shutdown the power supply if undersized.  You must use the Von Duprin PS873 or...
To program the 8310-865 receiver: Set the dip switches 1 to the "OFF" (pulse) position. Set the dip switches 2 to the "OFF" (0.5s) position. Momentarily press the " No Delay" or "Delay" ...
No, CTE can only communicate with 1 reader.
Special Template ST-2795 is used to mount a non-adjustable (solid) regular arm for pull side mounting.