Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ CTE and electrified exit trim ”

Resolution: E996L electric trim is used to lock or unlock the lever trim for the 98/99 series exit devices.:

Resolution: Existing Von Duprin LP373L-BE trim can't be electrified. You can order an E-LP373L-BE trim. LP373L-BE or E-LP373L-BE trim is used with Von Duprin 94/95 series Inpact devices.:

Can I electrify an existing 360L?

Resolution: The Von Duprin 360L trim can be ordered with an electric option. This trim will not have key over ride when it is electrified. Existing 360L can't be converted to electric trim. Order E360...:

Does the 24 series have electrified trim?

Resolution: There is no FSA/FSE electrified trim option for the Flacon 24 Series device.:

Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

Is the Von Duprin EL option available on Von Duprin XP98 or XP99 exit devices?

Resolution: The EL (Electrified) option is available with Von Duprin XP98/99 exit devices. To order, specify ELXP98/99 with proper trim.:

How do I wire an EL device to normally hold open the latch and release it during a fire alarm?

Resolution: Use a normally closed fire alarm as the input to the power supply option board (PS873-2 or PS914-2RS), this will hold the latch retracted. During a fire alarm, the contact will open, dropping...:

What power supply is required for two EL devices and one LCN auto operator?

Resolution: Von Duprin PS914 x 900-4RL supports two EL with two auto operator.:

Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?

Resolution: For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM. We will furnish a device only, and the mortise cyl...:

Can the Falcon Monarch 718C or 718NL trim be used with the 25-C exit device?

Resolution: The Falcon Monarch 718C and the 718NL trims can be used on the 25-C exit device. The 718C trim is listed in the Price Book for the 25 series The instructions attache...:

What cylinder is used in a 210K trim for the 22 series exit device?

Resolution: Equivalent to the Schlage D series line with a C keyway. Part number 21-002.:

Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?

Resolution: The Von Duprin 994L series trims were square on top and bottom. They were discontinued in July 2010.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ CTE and electrified exit trim ”

RELATED FAQS