Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ control key replacement ”

RELATED FAQS

Question
Answer
What is the new option for the old 873-AC board?
When the new PS900 series power supplies were created we did not pursue a version of these option boards.  Need to discuss the specific hardware they are using and requirements to determine the app...
Why can't I remove the control key from the core after the core is inserted into the lever?
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
How are interchangeable cores installed?
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
What is the part number for a full size interchangeable core control key?
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...
What is the control key bitting for 0 bitted small format interchangeable cores?
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
What are the different cylinder types available?
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed. These are the most commonly used cylinders sometimes called key-in-lever...