control key bitting Falcon

RELATED FAQS

Question
Answer
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
A purchase order must by entered through Order Entry.Part number 50-123 for Schlage and 50-123F for Falcon.  Reference the structure number (preferred) or an order number for existing mas...
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed. These are the most commonly used cylinders sometimes called key-in-lever...
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.