Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ continuous hinge rabbeted edge ”

RELATED FAQS

Resolution: Transom Panel, Rabbeted Transom Panel:

Does the SL-Series door have a square edge?

Resolution: The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...:

What is the hinge backset for 1 3/4" thick door?

Resolution: Hinge backset is the dimension from the leading edge of the hinge to either the stop on the frame or to the stop face (push side) of the door. For operating clearance, the hinge backset on the d...:

HINGE EDGE

Resolution: Hinge Stile:

What is the standard downsizing for a door leaf when using continuous hinges?

Resolution: Doors require special downsizing for continuous hinges. The amount of downsizing depends on the hinge specified (manufacturer and type) and the hinge application (Full Mortise versus Full Surface v...:

Where is the Fire Label located on a door and a frame?

Resolution: Fire labels (UL, ITS/WHI or FM) are located as follows: Butt Hinges and Pivots: On the doors the fire label is located on the hinge edge between the top and 2nd hinge preparation. On the fram...:

Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?

Resolution: Cutout depends on the size of 224 hinge. See 112HD/224HD-EPT template. 112HD/224HD continuous hinge Center line of EPT to top of the door 83 inches 30 inches 85 inches 32 inc...:

What hinges can be used on tornado doors?

Resolution: The following hinges are available on Paladin series doors and frames: Butt hinges - 4 1/2" or 5" ball bearing type either standard or heavy duty Continuous hinges - full ...: