Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ construction core charges ”

RELATED FAQS

Resolution: Creating a Master Construction Credential - From first power up or after clearing memory: Remove the CT5000 lid. Press and hold the Schlage button. Present a credential to the reader within ...:

Can the low coin cell Nuisance delay be Disabled on a CO200?

Resolution: The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:

How to order the mortise full size interchangeable core with a construction core.

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

What Schlage construction core will work in a C987?

Resolution: Any SFIC core will operate in the C987. Specifically, the Schlage temporary cores are the 80-035 GRN and 80-035 BRN.:

What is thermal bow?

Resolution: Thermal Bow is a temporary condition which occurs in metal doors mainly due to the temperature differential from one side of the door to the other. This may occur in exterior doors when direct sun ...:

Are 4" hinge preparations available?

Resolution: Yes, 4" butt hinge preparations are available as an option on hollow metal doors and frames as noted below: Hinge type: square corner with commercial hole pattern. Preparations for radius c...:

What cores are offered for insulated doors?

Resolution: Insulated Core Options: Steelcraft L-Series doors are available with the following 2 optional insulated cores: Polystyrene slab - this core is available in non fire rated and fire rated doors...:

What are the door cores A, B, C, D, E & F per SDI 100?

Resolution: These references are from an old and outdated SDI 100 specification. The new specification SDI 100 ANSI A-250.8 does not contain letter designations for core material. Core constructions designat...:

Are steel stiffeners required in all door constructions?

Resolution: No, steel stiffeners are not required in Hollow Metal doors, they are one of many optional core available.Per ANSI/SDI A250.8 and ANSI/HMMA 867, core construction are optional offeri...:

What is the standard Falcon cam?

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

How do you order the ND series lock with a small format core?

Resolution: The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core: