constrtuction core bitting


Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6  This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
Any SFIC core will operate in the C987.  Specifically, the Schlage temporary cores are the 80-035 GRN and 80-035 BRN.
Rim cylinder housing only for FSIC is part number 20-079.
Rim cylinder housing only for SFIC is part number 80-129.
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
A purchase order must by entered through Order Entry. Part number 50-123 for Schlage and 50-123F for Falcon.   Reference the structure number (preferred) or an order num...