Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
consruction core bittings
”
RELATED FAQS
Question
Answer
Does Schlage offer a Rim cylinder FSIC housing less core?
Resolution:
Rim cylinder housing only for SFIC is part number 80-129.:
What is the part number for the full size core driver for the ND series?
Resolution:
The ND-Series FSIC driver is part number N523-127.:
Is the B250 series deadbolt available with a small format interchangeable core?
Resolution:
The B250 product line is not available in the SFIC platform.:
How is a bitting list obtained?
Resolution:
A purchase order must by entered through Order Entry. Part number 50-123 for Schlage and 50-123F for Falcon. Reference the structure number (preferred) or an order num...:
What is a sample letter of authorization for restricted key systems?
Resolution:
Letter of Authorization (LOA) allows restricted product to be purchased. Restricted product sample LOA. Bitting list sample LOA. :
Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?
Resolution:
ND locks can be extended up to 6" Extended Outside. :
Is the 23-030 a small format or full size core?
Resolution:
The 23-030 is a Schlage Full size interchangeable core. :
What type of core will a lock with the cylinder suffix "J" accept?
Resolution:
The full size interchangeable cores or FSIC from Schlage.:
What is the part number for T lock tailpiece used with a conventional cylinder?
Resolution:
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:
Is a standard cylinder keyway such as "C" available in SFIC?
Resolution:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:
How to order a T series lock with a Corbin Russwin full size interchangeable prep.
Resolution:
Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6 This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.: