concealed vr trim

RELATED FAQS

Question
Answer
The VR 810NL-V or VR 814NL-V is used on both the 25-R & 25-V devices.
You will need to check with the other manufacturer.  Check the template for the other manufacturer to see if the hole pattern for the trim and the cylinder location would match up.  The VR trim cou...
The "500" Series trim in general (510L, 511L, 512's, & 513K) will work with all 25 series devices and are not device specific.
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
The AD or CO - 993 is NOT compatible with a Von Duprin 98/99 Concealed Vertical Rod exit device on wood doors.
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers) Devices built Befo...
 Modular 1-1/8"  Modular 1-1/4"  SFIC and FSIC  Non-Modular Non-IC Conventional  Non-Modular Non-IC Everest Primus  B520-730  B520-731  B520-2...