Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Concealed closer with coordinator ”

RELATED FAQS

Resolution: The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.:

Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?

Resolution: ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.This ST also REQUIRES the use of a 4040-18TJ drop plat...:

What are Hold Open Closers & Magnets?

Resolution: Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:

What is the difference between the 2030 and 5030 closer?

Resolution: 2030 and 5030 are both overhead concealed closers. Catalog information can be found here. The 2030 uses a concealed, in the door, track, and a concealed one piece arm. The 5030 use...:

What are Overhead Concealed door closer?

Resolution: Overhead Concealed door closers are used to provide a more aesthetic look to the opening. Concealed in either the frame or the door Offer the ability to be adjusted to maintain...:

How do you identify what size a 2030 closer is?

Resolution: The Date Code and Closer Size are stamped in the backside of the closer body. These stamps will be on a smooth machined surface of the cylinder.Closer Size:If the number is "1", the...:

Is there a retrofit closer available for the obsolete 303 OHC closer?

Resolution: The LCN direct retrofit for the Obsolete 303 OHC closer was the 330 series, it was discontinued in 2009. The 3030 closer door closer body can be used as a replacement cylinder. :

Are there any parts available for the old Dor-O-Matic 1200 overhead concealed series closers?

Resolution: The Dor-O-Matic overhead concealed manual door closers have been obsolete since 1999, and there are no parts available for them.:

What different types of door coordinators are available?

Resolution: There are 2 types of door coordinators available: Bar Coordinators (Ives COR Series): Surface mounted to the bottom surface of the frame soffit. The active door lever, located nearest to th...:

Does the bar type coordinator come with a rub plate?

Resolution: The rub plate comes standard with all bar type coordinators; COR32,42,52,60 and 72.:

What size Allen wrench is used for Closer adjustment?

Resolution: LCN does not supply Allen wrenches. The size allen wrenches that LCN uses, are standard sizes that every installer will have in their tool kit. 3/32" Allen wrench for adjusting&...:

What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?

Resolution: The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...:

Can a 4110 EDA and a Glynn Johnson 100 be used together?

Resolution: A special template is not needed, the closer drops down far enough on the door where it does not conflict with the GJ100 series concealed overhead stop. :

How do you install a Senior Swing 9540 on one leaf of a double door?

Resolution: Surface Mounting - A 9542 HDR2 (Double Door Header) and a 9540-18 mounting plate can be used on the active leaf. A manual closer with a PA (parallel arm) can then be installed on the inactive leaf....:

How do you identify the model number and date code of an LCN cast iron hydraulic closer?

Resolution: The date is a 4 digit #. The first 2 numbers indicate the week it was made, and the last 2 numbers indicate what year it was made. On most surface mounted closers, the model #, date code, ...:

What closer can be used with Soss invisible hinges?

Resolution: Using Soss hinges with closers can require special device and preparation locations. If you have questions on specific closer applications, please e-mail your request (including a description ...:

How do you identify the model of a Falcon closer?

Resolution: To determine the SC series, measure center to center on the closer body bolt hole mounting pattern and an overall description of the closer and arm. SC91 -- 6-3/8" x 3/4" -- unique arm SC93 -- 9-1...:

Are there special brackets needed when using the 4110 series with a coordinator?

Resolution: When using the 4111 with a bar style coordinator MB-mounting brackets ordered from IVES are required. The brackets wrap around the coordinator to provide a surface for mounting the parallel arm ...:

What drop plate is used with a 4040 Rw/PA?

Resolution: The 4040 Rw/PA can be mounted 3 different ways. The 4040-18 drop plate is used for the regular pull side mount. The 4040-18TJ drop plate is used for the top jamb push side mount. The 4040-18P...:

What strike would be used for a 25-R for pair without mullion?

Resolution: For non fire rated doors only the 1609 strike would be used on the inactive leaf that is flush/surface bolted or with a *surface or concealed vertical rod device on other door leaf.:

Can the bar style coordinators be used with swing clear hinges?

Resolution: No, the geometry of a swing clear hinge prevents the coordinator from working correctly. The bar style coordinator will not hold the active door open far enough for the inactive door to clear the ...:

FINISH PLATE

Resolution: Concealed Closers, cover plate:

WOOD MOUNTING CLIP

Resolution: Designed to ease installation of concealed closer in wood frame:

FIRE SHIELD

Resolution: Concealed Closers, UL, Underwriters Laboratories:

Can I use a 4040 EDA and a Glynn Johnson 100 series concealed stop together?

Resolution: There is not a conflict between the 4041/4040XP EDA door closer and the GJ 100 or 410 overhead concealed series stops. The exception is: the 4041/4040XP mounted on a drop plate, and the Glynn Jo...:

CUTOUT

Resolution: Prep for concealed closer, mortise:

Does Allegion write specifications and specs?

Resolution: Allegion does provides professional support to Architects and Design Professionals. For information related to specification development and support, Website for Architects and Desig...: