Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ concealed bearing hinge ”

Resolution: ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.This ST also REQUIRES the use of a 4040-18TJ drop plat...:

What hinges can be used on tornado doors?

Resolution: The following hinges are available on Paladin series doors and frames: Butt hinges - 4 1/2" or 5" ball bearing type either standard or heavy duty Continuous hinges - full ...:

What closer can be used with Soss invisible hinges?

Resolution: Using Soss hinges with closers can require special device and preparation locations. If you have questions on specific closer applications, please e-mail your request (including a description ...:

Do we have a maximum door width or height for using pivots?

Resolution: The maximum door width that pivots have been tested is a 4' wide door. Any door greater than 4' would shorten the life of the pivots. There is no maximum door height, for offset pivots the ru...:

FULL COMPLIMENT BEARINGS

Resolution: Low friction, high load needle bearings found in all LCN closers:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ concealed bearing hinge ”

RELATED FAQS