Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ compatible schlage cylinder with von duprin ”

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What cylinders are used to operate Von Duprin devices?

Resolution: If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed. In order to determine cylinder type n...:

New FSIC driver info for the AL locks.

Resolution: The new AL FSIC driver part number is A700-052. This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring. Th...:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What cylinder is required for the 360L from Von Duprin?

Resolution: A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ compatible schlage cylinder with von duprin ”

RELATED FAQS