Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ COMMUNICATING FRAME HANDING ”

RELATED FAQS

Resolution: Communicating Frames are hollow metal frame fabricated such that a door is installed in each rabbet of a double rabbeted frame (2 doors total) to facilitate dual access and control of the opening, ...:

Why doesn't the AD-Series-Exit Device communicate with the Hand Held Device after rehanding the lockset?

Resolution: During the rehanding of an AD-Series Exit (993) device or the rehanding of a CO-Series Exit (993) device it is possible for the customer to damage the 5-inch pcba by using the wrong screws. D...:

Hand Reader just stops communicating via Ethernet?

Resolution: When the Ethernet communications suddenly stop working on a biometric hand reader, there is the set of questions to ask the customer to start the troubleshooting process. They are detail orie...:

Von Duprin electrified mullions and handing details.

Resolution: 4754, 4854 and the 9854 are electrified mullions and handed as noted below: 4754 is not handed: Prepared for two 4263 monitor strikes. Use with all Von Duprin rim panic devices 4854 is han...:

Can I communicate via RS-232 to a Hand Reader if they have an EN-200 ethernet or MD-500 modem installed?

Resolution: If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu. In order to ...: