Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
coin turn mortise cylinder
”
RELATED FAQS
Question
Answer
How do you specify cylinder dogging for mortise cylinders?
Resolution:
XQ11-947 was used Classic conventional cylinders prior to the release of modular - NOW OBSOLETE:
Can you order the old non-modular mortise cylinder?
Resolution:
We have completed our transition to the modular design and no longer have the old design.:
What cam to use for a modular cylinder in Sargent mortise lock?
Resolution:
The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:
What Schlage cam will operate Sargent locks?
Resolution:
Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :
Is a mortise cylinder coin turn offered?
Resolution:
Coin turn will need to be on a separate line item, specify 09-487 x length (118, 114, 138).This cylinder coin turn is non-handed so it can rotate freely in both directions.:
Which cylinders were not affected by the modular design change?
Resolution:
The following list of cylinders were not affected by the change to modular cylinder: 09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...: