Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cns or scns? ”

Resolution: EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...:

Can you mount a 4041 Cush arm with a EDA arm template and get 180 degrees opening?

Resolution: The dead stop post would need to be removed and the 4040/4040XP EDA mounting template for 180° would be followed.:

When did the 4111 Cush arms become non-handed?

Resolution: This engineering change did affect the templating of the closer. The stop in the shoe is slightly larger than the original handed cush shoe. The new non-handed arm template locates the closer and s...:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

SCUSH (SCNS)

Resolution: Spring Cush -n- Stop Arm, Spring Cush n Stop Arm, Spring Cush and Stop Arm:

CUSH-N-STOP ARMS

Resolution: CUSH, Parallel Arm, CNS:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cns or scns? ”

RELATED FAQS