Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closers, troubleshooting internal pressure vs. closing force ”

Resolution: If an Size 1 (ADA) closer is set to 5 lbs. opening force, it will only have about 3 lbs. (60/70%) closing force. If the closer will not close against air pressure, but the ADA requirements have to ...:

What LCN closer has the strongest closing force?

Resolution: The size 6 handed closers will have the most (strongest) closing force. The 4016 (pull side), the 4026 (top jamb push side) or the 4116 (push side parallel arm) have the highest closing force.:

What is the minimum and maximum PSI applied to a 4800 operator?

Resolution: The pneumatic operators are designed to function with an input air pressure to the 7901/7902 Series control box of 80 (min) 100 (max) PSI, and an output pressure of 60 to 80 PSI to the pneumatic (2...:

What can be done for a door that will not close against wind pressure?

Resolution: To correctly answer this question, we need to know how much more force is required to get the door closed. They could try turning the Rod & Shoe over (short side of shoe towards the hinge), or they...:

Does LCN sell a coupler to stack two 4040XP closers together?

Resolution: LCN does not recommend this type of installation, and has never sold a coupler to do this.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closers, troubleshooting internal pressure vs. closing force ”

RELATED FAQS