Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ closer thru bolt ”

RELATED FAQS

Resolution: Thru-Bolt, Self Reaming & Tapping Screws:

How to remove a double cylinder deadbolt?

Resolution: Schlage and Falcon double cylinder deadbolts have concealed screws to prevent tampering. The two methods used to conceal the thru-bolts are using screw caps or a faceplate. Use the below instructio...:

What parts need to be replaced to switch escutcheons?

Resolution: You need to replace the outside lever and escutcheon assembly, the inside escutcheon, and the escutcheon thru-bolts. The part numbers are specific to the function. Reference the pricebook.:

What causes the top rod case to pull away from or strip out of the face of a steel door?

Resolution: Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...:

TBTRX

Resolution: Thru-Bolt, ‘Torx’ Machine Screws:

TBWMS

Resolution: Thru-Bolt, Wood & Machine Screws:

Do LCN closers come with thru bolts?

Resolution: The standard screw pack for an LCN closer is the SRT (Self Reaming and Tapping) screw. Thru bolts are an option, but must be specified on the order. There is no charge for them, but they do need to...:

What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?

Resolution: A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.:

Can a 4040 regular mount installed on the pull side and a Glynn Johnson 90 be mounted together?

Resolution: The LCN 4041/4040XP and the Glynn Johnson 90 series can be mounted in conjunction with each other without a special template. The 4040 door closer is on the pull side of the door and the GJ 90 is ...:

What are the part numbers for the mounting posts and screws for an L9000 lock?

Resolution: Mounting Posts Part Number Door Thickness L583-211 1 3/8" L583-212 1 3/4" - See note section on SL1 trim L583-213 2...:

Is there a tool to drill the thru bolt holes on cylindrical locks?

Resolution: Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:

What is the thread size on LCN thru bolts?

Resolution: The LCN Thru bolts accept 1/4-20 thread. LCN thru bolts are made of steel with zinc plating.:

FASTENERS

Resolution: Screws, Thru Bolts, SNB, Sex Nuts & Bolts: