clear blade stop spacer

RELATED FAQS

Question
Answer
The LCN -61 Blade Stop Spacer is powder coated steel and measures 4" x 1 1/8" x 1/2" (overall dimensions).
Shoe Spacer, Parallel Arm Closers, Aluminum Frame, Aluminum Store Front Frame
Though not designed for use in exterior applications, the 6111 electric strike will function with the 98/9952 series exit device.  Depending on the construction of the gate post, a blade sto...
BSS means - Blade Stop Spacer.  A -61 for example would be used after the series of the closer being used. CSS means - Cush Shoe Support. A -30 for example would be used after the series of the cl...
010055-xx is the part number for Blade Stop Shim kit for 6111 or 6113 electric strike and it must be ordered separately.  xx is for the finish callout.
See image, ANSI A115.1 Mortise Lock Prep   This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not ins...
Aluminum Frame, Aluminum Store Front Frame, Aluminum Door and Frame
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
The blue lever tool remover, 24002693, is not shipped in every box. The existing wire spring lever removal tool will be included in every box.  
When trying to do a general exclusion on Ring if the Tools option does not appear this is due to being set as a shared user rather than an owner on the system. Contacting Ring support can help reso...