Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ chexit power transfer part number ”

RELATED FAQS

Question
Answer
What is the part number for the CX wiring assembly?
The part number for "CX Wiring Assembly" also called "Ten Wire Connector" is 112018-00.  
What gauge wire is needed for a CX device?
For devices shipped after 8-24-2015 with motor driven:  a.       0-200 ft, use  #18 gauge wire b.      0-500 ft, use #14 gauge wir...
For Product Shipped prior to 8-24-2015 with solenoid driven:          a.       0-100 ft, use #14 Gauge Wire      b.&n...
What is the part number for the 6000 series electric strike 24VDC solenoid?
The Von Duprin 6000 series electric strike can be converted by ordering the appropriate kits below.  Kits include the solenoid, plunger, spring, and washer. 6000 Series solenoid Kit 12VDC -...
What is the Von Duprin Chexit module part number?
Part number for Von Duprin standard 15 sec. release Chexit module shipped after 8-24-2015 with motor driven is 040086-00. Part number for Von Duprin standard 15 sec. release Chexit module shi...
What is the part number for the Von Duprin 15 second CX sign?
113781 is the part number for Von Duprin 15 second CX sign.
What is the part number for the CX-RX switch?
For motor driven Chexit devices shipped from the factory after 8-24-2015, the RX switch is standard, part number 116717-00. Note:  A slight change to the plastic housing was added in Nov...
For solenoid driven Chexit devices shipped from the factory prior to 8-24-2015, the RX switch is no longer available.  This part was discontinued in 2019. If the older version Chexit RX s...
What is the part number for a horn on the Chexit?
If the horn fail to operate in the CX device you need to replace the Chexit module. 040086 is the part number for devices shipped after 8-24-2015 with motor driven.050228 is the...
Is the Von Duprin Chexit part number 050228 a module or a kit?
The circuit board is sometimes referred to as a "module" in the field.
What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?
The Trim/Device Cable part number is 040193.  If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no additional ch...