Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ chexit installation wiring ”

RELATED FAQS

Question
Answer
Is the the PS914 EL wiring adapter needed for Von Duprin Chexit device?
The EL Wiring Adapter is not needed for a CX device.
Where can I find wiring information for the Chexit?
Chexit devices shipped after 8-24-2015 with motor driven:Attached is the installation instructions of the the Von Duprin Chexit devices that includes the wiring diagrams.Installation Instructions&n...
Chexit devices shipped before 8-24-2015 with solenoid driven:Attached are the single and double door wiring , cable voltage reading documents for trouble shooting, and the installation in...
Can you connect an external horn to a Chexit device?
Chexit devices shipped after 8-24-2015 with motor driven:Use the Alarm Relay Contacts on Field Wiring Cable, blue and brown wires of the Chexit device.Connect the blue wire to +24VDC (red wire on F...
Chexit devices shipped prior to 8-24-2015 with solenoid driven:Use the external alarm contact, blue and brown wire on Chexit device.Connect the blue wire to the red wire and connect the brown wire ...
What is the part number for the CX wiring assembly?
The part number for "CX Wiring Assembly" also called "Ten Wire Connector" is 112018-00.  
Which direction does the Von Duprin CX 10 wire harness plug into the board?
Chexit devices shipped after 8-24-2015 with motor driven has a twelve wire connector wires and is keyed and can only plugged into the Chexit module in one direction.   Chexit d...
Do you have a micro-switch with orange wires?
The micro-switch with two orange wires is probably the Chexit switch assembly for devices shipped prior to 8-24-2015 with solenoid driven, part number 13-065-00.