Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ chexit dummy trim ”

RELATED FAQS

Question
Answer
What is the minimum opening that a Chexit 4' device can be cut down?
The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening.  This an...
L0172
Full dummy trim - Knob/lever on both sides is fixed by mounting bar.
MA18
Double dummy - Double dummy trim
MA12
Single dummy - Single dummy trim
H170
Inside half dummy trim - Snap-on rose and knob. Concealed mounting screws.
L0170
Half dummy trim - Knob/lever on one side is fixed by mounting bar. N escutcheon only. Not recommended for use on wood doors.
LT170
Single Dummy Trim - Dummy trim for one side of door
How can a TK400 be reset to factory defaults
The TK400 kit contains an PIM400-TD2 and a WPR400-DT (Dummy Trim) and charger. The WPR400-DT reader has no electronics it is an empty plastic shell. Since the WPR400-DT does not have electronics ...
If a factory default reset (FDR)  is absolutely needed, you MUST temporarily replace the credential reader with another reader that has a Schlage Button.  This should be rarely if ever required. T...
What size is the Schlage H escutcheon?
  Schlage H-Series Escutcheons    Part Number  Description Dimension   07-057  Inside escutcheon and turn  6.92" x 2.75"  07-035  Inside escutcheon, dummy - H170  6.92" x 2...
Will the door unlock if a Von Duprin CX 98 / 99 Chexit device is deactivated with card reader and has a 996LBE trim?
When CX99L-BE is not armed with key cylinder on the device or shunted by card reader, the exterior 996LBE lever trim will release.
How does the outside trim function on a Chexit Rim or Vertical Rod device?
A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...
Can the Chexit 98/99 be used with the E996 lever trim?
You can use the E996L electric trim with Chexit 98/99 series exit device.
Why is the electric E996L-FSE trim used with a Chexit CX99 exit device?
The E996L-FSE trim is needed if the application requires fail-secure operation from the trim side of the opening. When power is out on Chexit device, E996L-FSE trim will remain locked to ...