Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ change function nd lock ”

RELATED FAQS

Question
Answer
Does Schlage offer ND conversion kits to convert to Classroom Security function?
Conversion kits are available to convert many popular functions.Conversion kits manufactured on or after January 30, 2017 will have the new enhanced ND spring cage, lever, plunger and buttonCo...
For all available ND Series Conversion Kit part numbers, click here.
What is this plastic clip on the ND chassis?
On August 15, 2012 Schlage began shipping ND-Series locks with a hassle free clip to aid with the installation of the anti-rotation plate.  This feature has been added to the hub to keep the anti-r...
How long is the ND tailpiece for a thick door?
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...
What replaced the old D series lever locks?
The old D series lever lock was replaced by the ND lock in September 2003.
Can the ND80 / ND12 / ND96 be converted from EL to EU or EU to EL?
The ND electrified motor driven locks shipping as of  March 14, 2016 has a field selectable operating mode, you can convert from EL to EU or EU to EL by flipping a switch on the chas...
The electrified ND electrified solenoid driven lock shipped prior to March 14, 2016 can be converted between fail safe (EL) and fail secure (EU) by swapping out the solenoid, sleeve,...
What parts are needed to convert JD to BD on an ND lock?
For ND locks shipping on or after January 30, 2017, the lever and core driver will need to be changed to convert from JD to BD.SFIC lever, 03-200SFIC driver and spacer, 09-774
For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed.  Depending on the function the components below are required.Outside spring c...
What parts are needed to convert an ND lock from JD to LD?
On ND-series locks manufactured on or after January 30, 2017, the following parts are needed to convert the lock from JD to LD:03-231 - Open Cylinder lever (specify design and finish)N523-022 - Tai...
How to convert a ND series lock cylinder format from PD to BD?
On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...
How do I convert the ND95 to a ND75?
To convert from a ND95 to a ND75 remove the outside keycam and replace it with the N123-009 keycam.
How do I change the function on an ND53 to an ND50?
Swapping out the following parts of an ND50 will convert it to an ND53: Swap N123-028 Push button plunger for  N123-017, Push and Turn button plunger Swap N523-000, Push button for N523-001 Pus...