Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
CANNOT LINK PIM
”
RELATED FAQS
Question
Answer
PIM COMPATIBILITY
Resolution:
No, the AD400 / WRI400/ WPR400 only work with the PIM 400-485 or PIM 400-TD2. The legacy WA locks / WRI / WPR2/ WSM only communicate with the legacy PIM-485 or PIM-TD2.:
Why can't I LINK my AD-Series lock?
Resolution:
1. To put the AD400 in LINK mode, hold down the RTE (Lever or crash bar see below) and press the # key on the key board, or present a card to the reader. ...:
How does Dynamic Channel Switching (DCS) work on the AD-Series?
Resolution:
Setting Dynamic Channel Switching 1) Connect and couple the SUS to the PIM400 you intend to change. See the SUS User Guide for details 2) Under “PIM Properties” and the “Edit” tab is ...:
Is there a way to clone a failed PIM400 so it could be replaced without having to re-link associated locks?
Resolution:
It is currently not possible to clone an AD-Series PIM400.: