can you use electrified trim with chexit device

RELATED FAQS

Question
Answer
The E996L-FSE trim is needed if the application requires fail-secure operation from the trim side of the opening. When power is out on Chexit device, E996L-FSE trim will remain locked to ...
A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...
You can use the E996L electric trim with Chexit 98/99 series exit device.
When CX99L-BE is not armed with key cylinder on the device or shunted by card reader, the exterior 996LBE lever trim will release.
Existing Von Duprin LP373L-BE trim can't be electrified. You can order an E-LP373L-BE trim. LP373L-BE or E-LP373L-BE trim is used with Von Duprin 94/95 series Inpact devices.
The only electric trim that is used with the 98/99 series exit device that Von Duprin offers is E996L lever trim.
E996L electric trim is used to lock or unlock the lever trim for the 98/99 series exit devices.
The Trim/Device Cable part number is 040193.  If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no additional ch...
The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening.  This an...