Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Can you switch left and right hand
”
RELATED FAQS
Question
Answer
How do I determine the hand of a door?
Resolution:
Go to the push side of the door opening. See above illustration. If door swings out to the left, it needs a left hand door closer. If door swings out to the right, i...:
What would cause my door closer to try and open the door instead of closing it?
Resolution:
For a door closer that tries to open the door instead of closing it:The closer body could be mounted backwards on the door - check instructions for proper closer orientation.It could be the wrong h...:
What finish will the strike and latch be if ordered with a split finish?
Resolution:
The door handing determines the finish of the latch and strike. Left reverse and right reverse doors default to outside trimLeft and right hand doors default to inside trimIf lever and ro...:
How do I change the hand of a hotel cylinder?
Resolution:
HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation. Right hand shown below.:
Is there a left hand hold open clip (block) for a 3130 series closer?
Resolution:
As of Feb. 8th, 2016- LCN launched a new HO feature (block) for all track closers, which is not handed. Part # for the Hold Open clip (block) is 3130-3054 and it also requires the...: