can screws for drop plates be ordered separately

RELATED FAQS

Question
Answer
The 4040 Rw/PA can be mounted 3 different ways. The 4040-18 drop plate is used for the regular pull side mount. The 4040-18TJ drop plate is used for the top jamb push side mount. The 4040-18P...
The 4110-18, and 4110-18 CUSH  drop plates are identical. The difference between a 4110 EDA, and a 4110 CUSH is the templating on the door. That is why you order them differently, to...
ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.
How to Order: The Senior Swing header is ordered by the width of the door(s). The measurement from inside jamb to inside jamb of the frame. If the Senior Swing header is ordered the wrong length, ...
A 4040-18G drop plate will be needed to drop the closer and arm down far enough not to conflict with the GJ 90 series overhead stop.
All Von Duprin 98 and 99 trims include screws for both 1 3/4" and 2 1/4" thick doors.
It is not possible to mount a cylindrical lock less trim one side, however you can order the lock less components (like lever or rose).  If the customer is looking to mount the lever less trim, t...
The difference between the Brass version 482B and the Aluminum version 482A is the size and design as well as the base material and available accessories.  The Brass version  482B comes w...