Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can i use lcn outside ”

Resolution: EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push S...:

What power supply do I need for my 2 QELA devices with LCN auto operator?

Resolution: Use the PS902-2RS power supply with LCN auto operator on single door, PS904-2RS power supply on double door and PS904/906-2RS-2RS for 2 pair of QELA is required for basic operation with a...:

What arm can I use for the old LCN 4030/4130 closer?

Resolution: The old 4030/4130 closers and arms are obsolete, there is nothing to replace them. No arm from other closers will fit There is no closer that can replace the old 4030 series closer with the exa...:

Can you use the 925 tubing from LCN for the PN Von Duprin devices?

Resolution: If using the LCN pneumatic control box as the air source for the Von Duprin Pneumatic devises then you have to use the LCN 925 tubing because of the size of air line fitting on the LCN co...:

Can a magnet, or sentronic device, be released and close the door from a button at a desk?

Resolution: If a door is being held open by the LCN SEM 7800/1900 magnet or any ME/SE Series Sentronic LCN closer, you can remotely release that door to close by ordering the following parts and wiri...:

Which of the Pneumatic operators uses the same cylinder?

Resolution: The 4840 and the 4810 are they only cylinders that can be interchanged, they use the same cylinder for their individual applications.:

What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?

Resolution: The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...:

What is the maximum door weight recommended for LCN closers?

Resolution: The maximum recommended door weight for LCN manual closers is 225 lbs.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can i use lcn outside ”

RELATED FAQS