can falcon keys be copied at ace hardware?

RELATED FAQS

Question
Answer
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
The XQ06-878 is used to stamp "DO NOT DUPLICATE" on a key.
A PO from a distributor with a letter of authorization from the end user.
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
 See tables below for available punches.   KEY SECTION  BLUE PUNCH   Everest S*, C*, & Classic/Obverse*  40-075   Everest T* & ...
The hex dogging key size for all Falcon-Monarch exit devices is 7/32".