Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can an alk kit be stand alone ”

Resolution: Followings are the reason for 98/99 exit alarm ALK not sound when push bar is activated. Make sure key switch on exit alarm ALK is turned on, wait for 20 seconds before you activating the pushba...:

What is the part number for the EAK PCB only for Monarch Falcon devices?

Resolution: This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.:

What cylinder is used in the Falcon 24/25 exit alarm kit?

Resolution: The Exit Alarm takes a 1 1/8" Mortise cylinder with a straight cam. See first page of Exit Alarm inst below. Exit Alarm inst:

Does a Von Duprin ALK kit come with an RX switch?

Resolution: ALK kit comes with standard RX switch. It can be ordered without the RX switch or with LX switch as an option.:

What is the current draw of a Von Duprin exit alarm kit ALK?

Resolution: The current draw of a Von Duprin exit alarm ALK is .25 amp when alarm is activated.:

If using the alarm kit-ALK with the 99 device what power supply is needed?

Resolution: Exit alarm ALK operates with 9VDC battery and doesn't required a power supply.If you choose to hard wire the exit alarm ALK use the PS902 power supply.Exit alarm ALK requires 24VDC regulated power ...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can an alk kit be stand alone ”

RELATED FAQS