broken mounting bracket

RELATED FAQS

Question
Answer
The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack.  Please note it used to be shipped loos...
Those holes are for mounting the coordinator mounting bracket itself.  The brackets must be drilled and tapped for the hardware you are mounting to them.
The following list explains the differences between the Von Duprin 47 and 48 latch assemblies. The 47 top and bottom latches have 5/8" throw latchbolts. The 48 top and bottom latches have 3/4" ...
The solenoids are different.  The current standard EL solenoid and mounting bracket is a one piece unit. The bracket is crimped into the front of the solenoid. This solenoid and plunger has no mech...