best wb keyways

RELATED FAQS

Question
Answer
A PO from a distributor with a letter of authorization from the end user.
The part number is 48-102 C, you will need to specify the cuts.
The chart below outlines the hierarchy of the Everest C sections.  The bottom row (C134, C145, C135, C125, C124, C123, C234, C235, C245, C345) are available in a cylinder and key...
The profile or shape of the key is different.  This would apply to all key sections with differing names such as F, CE, etc.
The "C" indicates small format IC core, which is the only core style Falcon products.  The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder.  The kit includes the following: (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 (...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus. 
Regular Core (suffix keyway to number) Description Uncombinated Combinated 6-Pin 7-Pin 6-Pin 7-Pin Standard C646 C647 C606 C607 Best style capping CB846 CB847 CB...
Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...
There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8".  With small format, bo...
The 914KIL-IC trim is shipped with a Small format interchangeable core (SFIC) in a 6 pin "A" section/keyway.  A comparable core from Falcon would be the C646 (uncombinated - no pins) or C...
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
Schlage Everest 29 is a new keyway family that launched in August 2012 and is patented until 2029. It offers the highest level of restricted key system security by Schlage through patent protection...
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
The FA3 keyway is the ILCO equivalent to a Falcon Conventional G 6-pin keyway.
Schlage Everest B keyways are restricted SFIC keyways.
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.