Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ backcheck does not slow door ”

RELATED FAQS

Resolution: How to: What are the steps to adjust a door closer? Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All closers with a "Del...:

How do you slow down the closing speed of the 4600 series operator?

Resolution: The hydraulic closer underneath the control box has 3 regulating valves (like any 4040 series hydraulic closer). Main Speed - adjust closing speed from 90° open down to 10°. Latch Speed - adju...:

What size Allen wrench is used for Closer adjustment?

Resolution: LCN does not supply Allen wrenches. The size allen wrenches that LCN uses, are standard sizes that every installer will have in their tool kit. 3/32" Allen wrench for adjusting&...:

BACKCHECK

Resolution: Closer Adjustment, Door Control:

What is the delay time adjustment on a Delayed Action closers?

Resolution: Regular LCN closers have "3" regulating valves for General Speed, Latch Speed, and Backcheck. If the LCN closer has "4" regulating valves, then the closer has the Delayed Action feature. De...:

What would cause an ME Series closer (2310ME/4310ME/4410ME) to pop back into hold open as it is closing?

Resolution: This condition can be caused by the "closing speed adjustment" being regulated for a fast closing speed. Try adjusting the closing speed to slow down the closing of the door. If that does not corre...:

How can you tell the hand of a door closer?

Resolution: First you need to determine if the closer is handed. A handed door closer will only have a single shaft on one side of the closer for the arm to attach to. If the closer is handed...:

What is the valve on the back of a 4041/4040XP closer used for?

Resolution: The valve on the back of a 4041/4040XP closer is a "Back Check Selector Valve" that needs to be turned in on "Parallel Arm" mount applications ONLY. :