Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ASA Strike Location ”

RELATED FAQS

Question
Answer
ASA-SP
4 7/8" ASA Door Strike Prep with lip @ special location; ANSI A115.2, Door Strike Prep
What are the standard hinge and lock spacing for doors and frames?
Hinge Spacing: All 4 1/2" and 5" butt hinge spacing 1. Opening heights 3'0" through 4'11 15/16" (one pair butt hinges) from under head CL 9 3/4" (top of door 9 5/8") from bottom of frame ...
Hinge Backset: On the frame = 5/16" On the door = 1/4"
Lock Spacing: All standard bored locks ANSI 115.2 (161, 61L type), for mortise lock ANSI 115.1 (86 type) all locations must be altered 3/8" lower, and standard strike (ASA type). 1. Opening ...
What took place of the 3140 strike?
The Von Duprin 3140 electric strike is discontinued and the direct replacement is 6211 electric strike.
Where can Von Duprin 6300 electric strike installation instructions or templates be found?
Von Duprin surface mounted 6300 electric strike paper template and installation instruction are provided with the electric strike. See attached https://us.allegion.co...
Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device.  Be sure this screw is installed- Exit hardware and strike must be properly mounted ...