Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
armored front strike
”
RELATED FAQS
Question
Answer
Can I use an electrified mortise with a door position switch (DPS) on a double door where dummy trim is installed on the inactive door?
Resolution:
Dummy mortise trim without a lock case (L0170/L0712) is used on an inactive door. You can use an electrified mortise with a door position switch on the active door. The strike prep must be co...:
What is an armor front?
Resolution:
The Armor Front for the Schlage L9000, LM9200, and LM9300 series has been referred as: Scalp, Face Plate:
Is there a Schlage lock with a toggle button?
Resolution:
The only Schlage lock with a toggle was the discontinued K-Series mortise lock.:
What is the difference between the 09-713 and the 09-663 armor front?
Resolution:
The 09-669 and the 09-718 are both latch bolt by auxiliary latch armor fronts that are 1-1/16" wide. The 09-669 will have a UL stamp for use with UL rated locks, but the 09-718 will not h...:
Is there a round corner armor front for the L series mortise lock?
Resolution:
The L series armor fronts are only available with square corners. :