Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ are Weiser and Kwikset conversion kits still available ”

Resolution: Format for ordering double cylinder (-2) and double cylinder with security indicator (-2si)(device) (fire rated)(-2 or -2si)(conversion kit)(finish)(handing) Examples:98/9927-F-2-Conversion Ki...:

What is the part number for the HD EL conversion kit for Von Duprin devices?

Resolution: HD-EL conversion kit for 3 feet exit device is 050384-00 and for 4 feet is 050385-00.:

Can you use a CD conversion kit on a 22 device?

Resolution: Cylinder dogging CD is not available with 22 series exit device.:

Is there an EL conversion kit for the Falcon 2390 exit device?

Resolution: There is no EL conversion kit for a 2390, the device will need to be replaced.:

Does EL or QEL conversion kit for Von Duprin exit devices contain mechanism cover plate?

Resolution: The conversion kit does not contain a new mechanism case cover plate. If a cover plate is desired, you would need the Fire or Less Dogging Cover Plate for EL/QEL conversion kit and Panic cove...:

What is the part number for QEL94/95 inpact conversion kit?

Resolution: The part will be configured as CONVERT.XXXX part numbers. The customer need to specify the following criteria. Required: Series 94 or 95, Fire or Panic , 3 feet/4feet or 2 feet 6 inches/2 feet...:

Can the EL or QEL conversion kit be used on the old Von Duprin 33/35 exit device?

Resolution: Current EL and QEL baseplate conversion kits can be used on all latching types of the 33/35 series (non "A" version which were manufactured prior to 2003). At one time, the obsolete black EL ...:

What is the part number for hex dogging conversion kit for a 99 device?

Resolution: The part number for hex dogging conversion kit for 99 devices is 050114.:

What back plate conversion kit is required for the 88 with the 373L trim?

Resolution: Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart :

Do we have conversion instructions for the E996 when shipping conversion kits?

Resolution: We ship the standard installation instructions because it contains enough information to show how to convert the trim from mechanical to electrical. (Note the instructions are now for reference onl...:

Is the Falcon 1390 exit device dogging kit (4270106669) still available?

Resolution: The Falcon 1390 exit device is discontinued and parts are no longer available from the factory. New England Door Closer may still have some older kits and can be contact...:

Is there a Von Duprin delay egress Chexit conversion kit?

Resolution: There is no conversion kit for Von Duprin Chexit device. If delayed egress Chexit device is required, the entire device must be replaced.:

Can the Von Duprin EL option be added to any existing 98/99 device?

Resolution: The Von Duprin EL option can be added to any existing 33A/35A, 98/99 series exit devices. :

CONVERSION KIT

Resolution: CK:

Is there a conversion kit to add Electronic Dogging (ED) or Electric Latch Retraction (EL) to a 1690 or 1790 in the field?

Resolution: There is no conversion kit to add EL or ED to an existing 1690 or 1790 series device. All of the components are built into the device, since the device does not have a separate base...:

Can you field install a RX switch on the 24/25 device?

Resolution: The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...:

Does Von Duprin offer a classroom security option with visual status indication?

Resolution: Von Duprin offers two options: The CDSI/HDSI Dogging Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible “LOCKED” and “UNLO...:

What is the part number for the E996L rim conversion kit?

Resolution: The 050672 is the part number for rim or vertical rod device and 050673 for the mortise device.:

Is there a Von Duprin conversion kit to change mechanical to electric latch retraction (QEL) in the field?

Resolution: Followings are the list of the electric latch retraction (QEL) kits:114317-00QELA Modular Conversion Kit040061-00QELA Modular Conversion Kit w/CON958002-00HD-QELA Modular Conversion Kit040062-...:

Do we offer a parts pack for modular mortise or rim cylinder?

Resolution: See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders. The 09-998 is a kit for a rim cylinder. :

Is there a conversion kit to make 94/95 devices into a QEL?

Resolution: Yes. Required Series 94 or 95 Fire or Panic 3FT/4FT or 2 ft 6 in / 2 ft 10 in Finish Optional LX switch &nbs...:

Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?

Resolution: You need to order the EL98/9947 or 3' EL conversion kit. This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.:

Is there a conversion kit to electrify the LP373L lever control?

Resolution: There is not a conversion kit to electrify the LP373L lever control. You need to order a complete E-LP373L-BE control through Engineering Specials.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ are Weiser and Kwikset conversion kits still available ”

RELATED FAQS