are undercuts channel


The bottom rod of the device will accommodate a 1/4" to 3/4" door undercut per 2130 template .
Floor Clearance, Clearance
Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...
Hinge manufacturers do not require or recommend that doors should be reinforced for continuous hinges. Steelcraft does not reinforce for continuous hinges unless it is specified on the customers' P...
The end cap for the 17/18 devices will not fit on the 24/25 devices due to the mechanism case being wider on the 24/25's.